Tech Account Commands - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers
VER Command: This command, which takes no options, displays the receiver's firmware version to the
console.
VOL Command: This command sets the volume of the receiver's headphone output. The syntax is:
VOL [v] where [v] is a value greater than or equal to 0 (mute) and less than or equal to 63 (full volume).
(This feature is not available on the PRO1Q unless fitted with optional control front panel).

6.2.2 Tech Account Commands

The commands listed in this section requires the user to be logged into the Tech account.
ALARM Command: The ALARM command tells you, and allows you to change, the current ALARM mask
the receiver is using. To see the current ALARM mask without modifying it, type ALARM without an
argument following it. To change the alarm mask, type: ALARM <MASK>, where <MASK> is a
hexadecimal digit in the range [0-FFFFFFFF]. Anything larger than FFFFFFFF will be interpreted as the
largest mask, FFFFFFFF.
ALIB Command: Used for file management and repairing receiver storage devices.
Option
LIST
DEL
INBOX
[TEST/SCAN]
FIX
FORMAT
HDD
AMR Command: Shows the status of the (optional) installed XDS-AMR receiver.
Option
PRESENT
46
www.picodigital.com
Argument
[FILES/ISCI/PROGRAMS]
[ISCI/FILE], [PATTERN]
[OFF/ON/GET]
[AUTO/FORCE],[CF/HDD/ALL]
[CF/HDD]
[YES/NO]
Table 7 - ALIB Command
Argument
Action
FILES
: List files in the audio library directory
ISCI
: List ISCI insertion files
PROGRAMS:
List assigned programs
Deletes specific files or files that matches a
certain pattern combination.
Controls the combination of terrestrial &
satellite delivery of files from the NMS
(headend).
Check compact flash and hard drive health
Scan/repair compact flash drive
Reformat compact flash or hard drive
Check or set intended HDD configuration
Action
Displays "true" if AMR is present
R830001-2001, REV. C
TOLL FREE 800.421.6511