XDS-PRO Satellite Receivers
4.1.5 Opto Inputs Tab
The Opto Inputs Tab provides the user with the ability to setup the Opto input mode and to program the
Opto Inputs to execute a command or a group of commands. The Opto input can be configured in two
modes; Coded and Uncoded.
4.1.5.1
Coded Opto Input Mode
In this mode, the receiver is expecting that there will be a closure in multiple Opto pins at a time, and the
combination of triggered pins can be can be programmed to a different function. There are 16 possible
combinations that the 4 Opto inputs can be triggered (see Figure 9).
Figure 9 - Opto Inputs - Coded
26
R830001-2001, REV. C
www.picodigital.com
TOLL FREE
800.421.6511