Configuring A Customized Service - ZyXEL Communications AMG1302-T10A User Manual

Chapter 10 Firewalls
The following table describes the labels in this screen.
Table 54 Security > Firewall > Rules: Edit: Edit Customized Services
LABEL
No.
Name
Protocol
Port
Back

10.3.3 Configuring a Customized Service

Use this screen to add a customized rule or edit an existing rule. Click a rule number in the
Firewall Customized Services screen to display the following screen.
Figure 81 Security > Firewall > Rules: Edit: Edit Customized Services: Config
The following table describes the labels in this screen.
Table 55 Security > Firewall > Rules: Edit: Edit Customized Services: Config
LABEL
Config
Service Name
Service Type
Port Configuration
Type
Port Number
Back
Apply
Cancel
Delete
148
DESCRIPTION
This is the number of your customized port. Click a rule's number of a service to go to the
Firewall Customized Services Config screen to configure or edit a customized service.
This is the name of your customized service.
This shows the IP protocol (TCP, UDP or TCP/UDP) that defines your customized service.
This is the port number or range that defines your customized service.
Click this to return to the Firewall Edit Rule screen.
DESCRIPTION
Type a unique name for your custom port.
Choose the IP port (TCP, UDP or TCP/UDP) that defines your customized port from the
drop down list box.
Click Single to specify one port only or Range to specify a span of ports that define your
customized service.
Type a single port number or the range of port numbers that define your customized
service.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to delete the current rule.
AMG1302-T10A User's Guide