Tutorials; Chapter 2 Tutorials; Overview; Getting Starting With The Nvg2053 - ZyXEL Communications NVG2053 User Manual

C
H A P T E R

2.1 Overview

This chapter describes:
• How to Make a VoIP Call
• How to Set up a Secure Wireless Network
• How to Access the NVG2053 Using DDNS
• How to Route Traffic to Another Network Using Static Route
• How to Set Up NAT Port Forwarding
• How to Use QoS to Prioritize LAN Traffic
Note: The tutorials featured in this chapter require a basic understanding of
connecting to and using the Web Configurator on your NVG2053. For details,
see the included Quick Start Guide. For field descriptions of individual screens,
see the related technical reference in this User's Guide.

2.2 Getting Starting with the NVG2053

This quick overview provides pointers on where in this User's Guide you can go to
get started with configuring and using the NVG2053.
Your NVG2053 may have come pre-configured from your ISP. If
such is the case, changing any network settings may affect your
ability to get online or connect to other computers on your
network.
Install the device as described in the included Quick Start Guide.
1
Connect and login to the Web Configurator at its default IP address as described in
2
Section 4.2 on page
to your device and its network connections. You will most likely need to connect to
the NVG2053 directly from your computer rather than over an existing network,
since the device's default IP address won't match that network's existing topology.
NVG2053 User's Guide
(see page 28).
(see page
(see
59. This is where you configure all available settings related

Tutorials

(see page 31).
(see page 39)
(see
43)
page 45)
2
page 41)
27