ZyXEL Communications AMG1302-T10A User Manual page 186

Chapter 17 Remote Management
Note: If you want your device to respond to pings and requests for unauthorized services,
you may also need to configure the firewall anti probing settings to match.
Figure 107 Advanced > Remote Management > ICMP
The following table describes the labels in this screen.
Table 74 Advanced > Remote Management > ICMP
LABEL
ICMP
Respond to Ping on The Device will not respond to any incoming Ping requests when Disable is selected.
Apply
Reset
186
DESCRIPTION
Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly
apparent to the application user.
Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming
WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming LAN and
WAN Ping requests.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302-T10A User's Guide