The Dynamic Dns Screen - ZyXEL Communications AMG1302-T10A User Manual

Chapter 16 Dynamic DNS Setup

16.2 The Dynamic DNS Screen

Use this screen to change your Device's DDNS. Click Advanced > Dynamic DNS. The screen
appears as shown.
Figure 99 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 68 Advanced > Dynamic DNS
LABEL
Dynamic DNS Setup
Active Dynamic
DNS
Service Provider
Dynamic DNS
Type
Host Name
User Name
Password
Enable Wildcard
Option
Apply
Cancel
178
DESCRIPTION
Select this check box to use dynamic DNS.
This is the name of your Dynamic DNS service provider.
Select the type of service that you are registered for from your Dynamic DNS service
provider.
Type the domain name assigned to your Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Type your user name.
Type the password assigned to you.
Select the check box to enable DynDNS Wildcard.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302-T10A User's Guide