System - HIKVISION DS-3WF03C User Manual

DS-3WF03C User Manual
Aggregation: It enables several data frames of 802.11 to be aggregated and
transmitted out, thus improve the throughput. In default, it's enabled.
RTS Threshold: If this is enabled, a RTS threshold value should be set. When the
length of a data packet is longer than this threshold, 802.11 RTC/CTS is enabled.
During this procedure, when a station (for example: Station A) wants to transmit
data, it will transmit a RTS to AP, and notify the AP that a data packet will be
transmitted. After the AP receives the RTS, it will notify all the stations can be
associated to so that they should postpone their data transmission until the
Station A's data transmission is finished.
Fragmentation Threshold：If the length of the data packet is larger than the
threshold value, the data packet is divided into multiple data packet for
transmission.
Multicast Date: When it's enabled, DS-3WF03C devices allow multicast function.
Antenna Switching：It can be chosen between internal antenna and external
antenna.
Enable Autonegotiation：When it's enabled, LAN port will adjust its speed to the
max value based on the connection speed and full-duplex mode, which means the
two devices connected by Ethernet cable can be adjust to the max speed and
duplex-mode. This parameter is set to be enabled for default.

9 System

System page is shown in Figure 26 and Figure 27, and it is divided into the
following 4 parts: Configuration Management, Firmware, Device Setting, Accounts.
Page 31