HIKVISION DS-3WF03C User Manual page 35

DS-3WF03C User Manual
Figure 26 Tools
Ping IP： User can input the destination IP address of another device, and click
Ping button. If that destination device is successfully connected to the DS-3WF03C
device, the result shows Alive, otherwise shows Not Alive.
Speed Test：When 2 DS-3WF03C devices are successfully connected, one device
acts as AP, and another device acts as Station. In the Tools page of the Station
device, User can input the IP address of the AP device here, and click Speed button,
the connection speed between them will be shown here.
Telnet ： When telnet is enabled, the user can input command "Telnet
192.168.1.36 " in the DOS window of Windows XP or Windows 7 PC, and then
telnet to the DS-3WF03C and manipulate the DS-3WF03C device. When telnet is
disable, this operation is disabled.
DHCPD：When it's enabled, DS-3WF03C device can act as a DHCP server, and the
Stations associated to it can dynamically get the IP address.
Syslog: When it's enabled, and the System Log server's IP is also set here, the log
information will be output to the Syslog server automatically.
Page 34