Bridge Mode; Firewall - HIKVISION DS-3WF03C User Manual

DS-3WF03C User Manual
WAN IP：WAN IP address. It should be set to the same segment of IP address of
the internet provided by ISP, please check with the ISP for this information.
WAN Netmask：WAN Netmask, use can check with the ISP for this information.
Note: WAN IP address should not be the same as the IP devices of the internet to
avoid collision.
LAN IP：LAN IP address.
LAN Netmask：LAN Netmask information.
Primary DNS and Secondary DNS: Please check with the ISP for the information.

7.2 Bridge mode

In Bridge mode, there is no WAN port. The LAN port of the POE adaptor, and the
LAN2 port of the DS-3WF03C device can all be the LAN port, and the user can
choose one of them to use as LAN port. Please refer to Figure 3 for the
connections in Bridge mode, and the IP address/Netmask information setting is
the same as Router mode.

7.3 Firewall

When the firewall is enabled, the device can allow only some devices to be
associated to. Shown in Figure 24, and there are 4 cases of Firewall filtering.
Figure 22 Firewall
1. Accept one or several devices with particular MAC address.
Page 27