Table of Contents
Advertisement
DS-3WF03C User Manual
SSID: Name of a wireless.
Shown in Figure 21, the user can click the Select button to list all the SSIDs that
can be associated, and then choose the one need to be associated.
Frequency：This only appears when the device is configured to Station or WDS
Station mode. If it's not enabled, the station will choose the same channel as the
associated AP. If it's enabled, another window will pop up and let the user to
choose the working channel, and this channel should be the same as the
associated AP's channel, which can fasten the association process between an AP
and Station.
Output Power：Output power of the device.
Country Code：Different countries allows different channels, use can choose the
country code to only allow the device works at the channels permitted in the
particular country.
Channel Width ： Channel width selection, and DS-3WF03C device supports
5MHz/10MHz/20MHz/40MHz bandwidth.
Max TX Rate：Max transmission rate, and it can be used to limit the max
transmission rate of a device.
Root AP MAC Address：In Station, WDS Station, and WDS Repeater modes, users
can use this to limit the APs associated to.
Security：User can set the security based on needs to guarantee the wireless
security.
WEP,WPA：Encryption method supported by 802.11 protocol.
Page 25
Advertisement
Table of Contents
