HIKVISION DS-3WF03C User Manual page 40

DS-3WF03C User Manual
4. The signal strength between 2 DS-3WF03C devices is too
weak, and throughput is low.
1. The DS-3WF03C AP and Station devices are not Line-of-Sight, or there are
blocks like a building in between the AP and Station devices.
2. The Station device and AP device is not aligned very well, including both
horizontally and vertically, since the antenna of the DS-3WF03C is directional.
3. The Station device is installed in the windows, and the windows glass shields
the wireless signal.
4. The distance between the AP and Station devices is too far.
5. The signal strength is high, but the throughput is low
1. There are two much interferences, or multi-path interferences. For example,
there are two much 5.8GHz WiFi device working nearby.
2. The RJ45 ports of the DS-3WF03C device don't work well.
6. During the
connection, when ping from one device to another, the
latency is too long or the packet is lost.
1. Isolate the several APs if they are connected to one POE switch.
2. The RJ45 ports are not connected very well.
7. The internet access is lost and the internet speed is low.
point-to-point
Page 39
or point-to-multi-point