Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-3WF03C
Summary of Contents for HIKVISION DS-3WF03C
- Page 1 DS-3WF03C Quick Start Guide DS-3WF03C Quick Start Guide...
- Page 2 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
- Page 3 DS-3WF03C Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
-
Page 4: Applicable Models
DS-3WF03C Quick Start Guide Applicable Models This manual is applicable to switches below: DS-3WF03C (product series). Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. - Page 5 DS-3WF03C Quick Start Guide Catalog Chapter 1 Introduction ....................... 5 1.1 Overview ..........................5 1.2 Packing List ..........................5 1.3 Appearance ..........................5 1.3.1 Front Panel ........................5 Chapter 2 Installation ......................... 8 Chapter 3 Prepare ........................10 Chapter 4 Configuration ......................12...
-
Page 6: Chapter 1 Introduction
DS-3WF03C Quick Start Guide Chapter 1 Introduction 1.1 Overview DS-3WF03C wireless bridge can be applied in industries, such as wireless video surveillance, railway, transportation, power and other industries, wireless video/data transmission, wireless coverage, carrier wireless backbone network construction, Wi-Fi wireless coverage, rural information construction, and wireless network coverage. - Page 7 DS-3WF03C Quick Start Guide Front Panel of DS-3WF03C Figure 1-1 DS-3WF03C Front Panel Indicator Indicators are used to monitor the status of the DS-3WF03C. See the following table for the description of the indicators. Figure 1-2 Indicators...
- Page 8 Yellow and red lights on, indicating signal level is medium. Green, yellow and red lights on, indicating the wireless signal level is strong Physical Interface The hardware interfaces of the DS-3WF03C are as follows. Figure 1-3 Physical Interface Table 1-2 Physical Interface Physical Interface...
-
Page 9: Chapter 2 Installation
DS-3WF03C Quick Start Guide Chapter 2 Installation Step 1 Select the unobstructed high point around the device to ensure that the devices are aligned and there is no obstruction in the middle. Fix the device as shown in the figure below. Attach the back of the device to the pole, use the hoop to pass through the hoop hole on the back of the device, tighten the hoop, and fix the device on the pole. - Page 10 DS-3WF03C Quick Start Guide Figure 2-2 Power on the device Step 3 The schematic diagram of the installation of the device is as follows. Figure 2-3 Finish installation...
-
Page 11: Chapter 3 Prepare
DS-3WF03C Quick Start Guide Chapter 3 Prepare Step 1 Use a network cable to connect the computer to the LAN interface of the device or PoE power supply to prepare the device. First, you need to configure the computer IP address and the device's default IP address to be on the same network segment. - Page 12 DS-3WF03C Quick Start Guide Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below. Figure 3-3 Internet Protocol Version 4 (TCP/IPv4) Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN.
-
Page 13: Chapter 4 Configuration
DS-3WF03C Quick Start Guide Chapter 4 Configuration After the preparation is completed, start the device configuration. Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of the device. On the same network segment, use a browser to log in to the device, open a browser, and enter the default IP address of the device in the address bar: 192.168.1.36. - Page 14 DS-3WF03C Quick Start Guide 192.168.1.X, X is any integer from 2 to 253, and the address is not used. The subnet mask can be used by default. Click “Next” when finished. Figure 4-2 Wizard – Network Step 3 Go to the “Wireless” page. The device can modify the wireless parameters such as network name, frequency, and key through this page.
- Page 15 DS-3WF03C Quick Start Guide Figure 4-5 Wireless For the Access Point device configuration, please refer to the station device configuration.
- Page 16 DS-3WF03C Quick Start Guide...