Table of Contents
Advertisement
DS-3WF03C User Manual
DS-3WF03C has one RJ45 ports, and they are marked with "POE". In the bridge
mode, please connect the device with the POE power adaptor in the following
way:
1) Remove the bottom cover from the DS-3WF03C device.
2) Using an Ethernet cable to connect the POE power adaptor and the "POE"
port of the DS-3WF03C device.
3) Connect the POE adaptor to the normal power supply board.
4) Mount the DS-3WF03C securely to the pole by locking the strap tightly.
3 Quick Configuration
This chapter describe how to configure the device quickly.
3.1 Log in
To log in the DS-3WF03C device, user needs to configure the TCP/IP of your
computer first as the following steps:
1、Right click Local Area Connection icon of your computer and click properties,
then click Continue, the Local Area Connection Properties dialog box appears as
Figure 5.
Page 12
Advertisement
Table of Contents
