HIKVISION DS-3WF03C User Manual page 36

DS-3WF03C User Manual
NTP Server：If this NTP server is set, and the DS-3WF03C device can access to this
NTP server. DS-3WF03C device automatically calibrate the time and date
information with the NTP server and show the time information in the Status page.
Ping Watchdog ： The ping watchdog sets the DS-3WF03C A Device to
continuously ping a user-defined IP address (for example, it can be the IP address
of the AP the Client is connecting to). If it is unable to ping under the user defined
constraints, the DS-3WF03C A device will automatically reboot. It is highly
recommended that users enable this feature at the side of "Wireless Station" and
disable this feature at the side of "Access Point".
Ping IP Address：Specify an IP address of the target which will be monitored by
Ping Watchdog. If this feature is enabled at the side of "Wireless Station", Ping IP
Address should be the IP address of the AP the Client is connecting to.
Ping Interval： Specify time interval (in seconds) between the ping requests are
sent by the Ping Watchdog
Startup Delay: specify initial time delay (in seconds) until first ping request is sent
by the Ping Watchdog
Ping Failure：Specify the number of ping replies. If the specified number of ping
replies is not received continuously, the Ping Watchdog will reset the WIFI only.
Reset WIFI：Specify the number of WIFI resets. If the specified number of WIFI
reset reaches, the Ping Watchdog will reboot the DS-3WF03C A Device.
Note：If users want to modify the parameters of Ping Watchdog, please
disable it first and then apply. When the web page shows that Ping
Watchdog is really disabled, users can now re-enable it with modified
parameters.
Page 35