Use Global Modify To View And Change The Same Property In Multiple Microblocks - Carrier i-Vu CCN Pro 4.2 Installation Manual

Input Address - enter the CCN path to link to this point. In i-Vu CCN Pro, all CCN tables will have a
○
Copy Path symbol
on the clipboard. In ApplicationBuilder, paste the path into the Input Address field, using Ctrl+V.
When you are finished adding Elements for your application, click Next.
2
Equipment Name - type a new equipment name, if desired.
3
Save Location - browse to a location where you would like to save the new custom equipment.
4
Click Save.
5
Custom graphic
Use ViewBuilder to edit the graphic that is created.

Use Global Modify to view and change the same property in multiple microblocks

Use the Global Modify feature to:
•
View a microblock's full path, control program name, and the roles or privileges required to change its
properties.
•
View or change a single property in several control programs at one time.
Browse to any page that displays the property you want to view or change.
1
Do one of the following to access Global Modify.
2
• Right-click the property, then select Global Modify.
•
Alt+click the property.
•
Click the Main Menu button
Make changes to the Control Program field, if needed.
3
NOTES
Use wildcards in the Control Program field to broaden the search.
○
For example:
vav* matches vav, vav1, vavx, vav12345
vav*z matches vavz, vav1z, vavxz, vav12345z
vav*1*2 matches vav12, vavabc1xyz2
vav?? matches vav11, vav12, vavzz, but does not match vav, vav1, vav123
* matches any control program
Click Show Advanced to view the location, value, and privileges associated with this property.
○
Select the tree item under which you want to search for every occurrence of that microblock in other
4
control programs.
Click Find All.
5
Select the properties in the list that you want to change.
6
Do one of the following:
7
Type a New Value to the right of each selected item (a).
○
Type a number in the Set All To field (b).
○
i-Vu CCN Pro 4.2
at the far right of the display. Click on this symbol to place a copy of the path
, select Global Modify, then click the property.
Operating i-Vu CCN Pro
21