Equipment Values - Carrier i-Vu CCN Pro 4.2 Installation Manual

Monitor and control equipment

Equipment Values

An Equipment Values report allows you to compare point information.
To create an Equipment Values report:
On the navigation tree, select the location where you want to view the report.
1
Click the Reports button drop-down arrow, then select New Report.
2
Select Equipment Values.
3
Type a name for the report.
4
Click Create.
5
On the Design tab, click the plus sign next to Page to verify or change the page size and orientation.
6
NOTE Changing the size and orientation of the printed page also changes the report layout on the View
tab.
Click the plus sign next to Rows.
7
Do one of the following:
8
On the selection tree, select the pieces of equipment you want to view in the report. (Use Ctrl+click,
○
Shift+click, or both to select multiple items.) Then click Add.
Optional: Select the Highlight alternate rows checkbox to make the report easier to analyze.
Click Next or the plus sign next to Columns.
9
10 Verify or change the report Title, Page units of measure for defining column widths, and Outer border
characteristics.
11 Select a column in the report preview.
NOTE The selected column is light purple.
12 Under Column Header, define how you want the column header to look.
13 Under Column Data, define the data you want in the column and how you want it to look. See table
below.
14 Optional: Use the Add, Delete, and arrow buttons below the report preview to manipulate the columns.
15 Click OK.
16 Click Run.
NOTE To run this report later, go to the location where the report was created. Click the Reports button drop-
down arrow, select the report, then click Run.
Type of Column Data
Point
86
Displays point data in the column.
Display
Select the property to show in this column.
Data is named Select this checkbox if similar points have different names in
differently in some
different equipment. Then add each of the names to the
equipment
to use
For example, if a point is named Zone Temp in one equipment
and Zone Temperature in different equipment, add both names
to the list.
Point to use Select the name of the point to show in the column.
list.
Name
i-Vu CCN Pro 4.2