Tcp/Udp Port Usage; Faq - Frequently Asked Questions - Carrier i-Vu CCN Pro 4.2 Installation Manual

Troubleshooting i-Vu CCN Pro

TCP/UDP Port Usage

Port
tcp*:80
tcp *:443
udp *:68
udp *:137
udp *:138
udp *:47808
udp *:47812
Udp *:50005 to 50008
udp *:47806
NOTE
•
These ports are used by the i-Vu Server. i-Vu CCN Pro listens through these ports.
•
SOAP uses the HTTP port.
•
The alarm pop-up is defined through System Options > General.
•
All CCN/IP and BACnet/IP ports have to be exposed if the connection between the i-Vu Server and the
device managers contain a firewall.
•
All other ports are not configurable.

FAQ - Frequently Asked Questions

"How do I set up the CCN Time Broadcaster?
i-Vu CCN Pro defaults as the CCN Time Broadcaster. You must set the clock in i-Vu CCN Pro in Main Menu >
System Options > System Settings > General tab.
"Where do I find out the details of the capabilities of the different privileges available for Login?"
Refer to System Options > Privilege Sets (page 35) for details.
"I noticed that the back/forward buttons in the browser don't work."
You must use the navigation inside the i-Vu CCN Pro interface.
"Can I use Firefox?"
At this time, i-Vu CCN Pro only supports the use of the Internet Explorer v6 and later web browser.
"Can I Ctrl-select Alarms to acknowledge them?"
No, you can either select a single alarm or all alarms.
"I've noticed that my settings for a Comfort Controller or UC disappeared."
The default graphic for a Comfort Controller and UC is a tabular display of points that have been enabled in i-
94
Server Ports
Protocol/User
http (Web Server)
https (Web Server)
DHCP Client daemon
nmbd (netbios/tcp requests)
nmbd (netbios/tcp responses)
Bacnet/IP
CCN/IP
Firmware CCN/IP
Alarm Pop-up Client
i-Vu CCN Pro 4.2