To Add Or Edit An Operator; To Delete An Operator - Carrier i-Vu CCN Pro 4.2 Installation Manual

Operator access

To add or edit an operator

Click Main Menu button
1
On the tree, click Operators
2
Click Add to enter a new operator, or select an operator to edit his settings.
3
Enter information on this page as needed. The only required fields are Name and Login Name. See table
4
below.
Click OK.
5
Field
Login Name
Change password
Force User to Change
Password at login?
Exempt From
Password Policy
Logoff options
Personal Information
Starting Location
Starting Page
System-wide Privilege
Sets
Groups

To delete an operator

Click Main Menu button
1
On the tree, click Operators.
2
Select the operator.
3
Click Delete.
4
Click OK.
5
40
, then select System Options.
Notes
The name the operator must type to log in to the system. This name must be
unique within the system.
Enable this field, then type the current and new passwords.
NOTE An operator can change his password on the My Settings page (page 41).
Forces the operator to change his password immediately after his next login.
Use this field with the Change Password field to create a temporary
NOTE
password that the operator must change after his next login.
If the advanced password policy is enabled in System Options>System Settings on
the Security tab, select this option if you do not want the policy to apply to this
operator.
If the automatic logoff feature is enabled in System Options>System Settings on
the Security tab, select one of the 3 logoff options.
You can enter contact information for this operator.
NOTE An operator can enter contact information on the System Options>My
Settings page (page 41).
and The location and page i-Vu CCN Pro will display after the operator logs in.
To assign a privilege set to the operator, select the privilege set's checkbox.
NOTES
•
Click Show current privileges only to see only the selected privilege sets.
•
A grayed out privilege set with a group name beside it indicates the operator is
inheriting that privilege set from the group.
To add the operator to a group, select the group's checkbox.
NOTE Click Show current privileges only to see only the selected groups.
, then select System Options.
i-Vu CCN Pro 4.2