Monitor and control equipment
This report...
Trend Usage
Parameter Mismatch
Commissioning
Equipment Checkout
Security
Audit Log
New Reports
Equipment Summary
Equipment Values
Trend Samples
To run a report
Select an item on the navigation tree.
1
NOTE A report shows data for the selected tree item and all its children.
Click the Reports button drop-down arrow, then select a report.
2
On the Options tab, define the layout and content of the report.
3
NOTES
Changing the size and orientation of the printed page also changes the report layout on the View
○
tab.
To create a CSV (Comma Separated Values) file after you run the report, select Support CSV text
○
format. See To create a PDF, Excel spreadsheet, or CSV file (page 84).
i-Vu CCN Pro saves report options for the current operator. When that operator logs in again, i-Vu
○
CCN Pro uses the same options.
Click Run.
4
Click PDF if you want to print the report.
5
To create a PDF or Excel spreadsheet
PREREQUISITE FOR CSV TEXT You must enable CSV text before you run the report. Click the Reports tab and
choose a report from the drop-down menu. Click the Options tab > Support CSV text format.
Run a report
84
allows you to...
Creates a summary of the information configured on the Trends Enable/Disable
tab.
Discover where your system has parameter mismatches that need to be resolved.
View the information on the Equipment Checkout tab of the Properties button
during commissioning. Also, find equipment that has not been fully
commissioned.
Create chronological lists of operators, property changes they have made, and the
reasons for those changes.
An Equipment Summary report can provide the following information for
equipment at or below the location where the report is created.
An Equipment Values report allows you to compare point information.
A Trend Samples report provides trend values for a particular time frame.
i-Vu CCN Pro 4.2