Custom Reports; Equipment Summary - Carrier i-Vu CCN Pro 4.2 Installation Manual

Select Reports page > View tab.
1
Click Run button.
2
Choose PDF, Excel, or CSV Text.
3
For Excel or CSV Text, click Open to view the file or Save to save it.

Custom reports

You can create custom reports to collect and display specific information. For example, you can create
environmental and power consumption reports for a building.
In i-Vu CCN Pro, you can create the following reports:
• Equipment Summary (page 85)
•
Equipment Values (page 86)
• Trend Samples (page 87)

Equipment Summary

An Equipment Summary report can provide the following information for equipment at or below the location
where the report is created.
•
Color
•
Active alarm
• Locked values
•
Current value of selected points
•
Effective schedule
To create an Equipment Summary report:
On the navigation tree, select the location where you want to view the report.
1
Click the Reports button drop-down arrow, then select New Report.
2
Select Equipment Summary.
3
Type a name for the report.
4
Click Create.
5
On the Design tab, define the layout and the Maximum number of rows.
6
To create a CSV (Comma Separated Values) file after you run the report, select Support CSV text format.
7
See To create a PDF, Excel spreadsheet, or CSV file (page 84).
Select or clear the Optional Sections checkboxes as needed.
8
Select Available Points that you want to include in the report. (Use Ctrl+click, Shift+click, or both to
9
select multiple points.)
10 Click Add.
11 Click OK.
12 Click Run.
NOTE To run this report later, go to the location where the report was created. Click the Reports button drop-
down arrow, select the report, then click Run.
i-Vu CCN Pro 4.2
Monitor and control equipment
85