Privilege Sets; Admin Privilege Set; To Add Or Edit A Privilege Set - Carrier i-Vu CCN Pro 4.2 Installation Manual

Operator access
For example, your system has two graphics categories, HVAC and Lighting/Security. You want HVAC
technicians to see only the HVAC graphics and security personnel to see only the Lighting/Security graphics.
To do this:
Assign...
Access User
Category 1
Access User
Category 2

Privilege sets

A privilege set is a group of one or more privileges (page 35). The Administrator creates privilege sets and
assigns them to operators and operator groups.

Admin privilege set

i-Vu CCN Pro has a default privilege set called Admin that includes most of the privileges. Only an operator
with the Admin privilege set can perform the following functions that are not controlled by privileges:
•
Add, edit, and delete operators, operator groups, and privilege sets.
• Update i-Vu CCN Pro Server with service packs and patches.
•
Register the i-Vu CCN Pro software. See To register your i-Vu CCN Pro software.
•
Enable and set up advanced security features such as location-dependent operator access and a
configurable password policy (if your system includes these optional features).
NOTE You cannot delete your own Admin privilege.

To add or edit a privilege set

Click Main Menu
1
Click Security tab and select Privilege Sets.
2
Click Add to create a new privilege set, or select a privilege set to edit.
3
Type the Name and Reference Name for the privilege set.
4
Select the checkbox beside each privilege you want to include in the privilege set.
5
Click OK.
6
CAUTION Include all required access privileges in a privilege set. For example, if you add Acknowledge Non-
Critical Alarms to a privilege set, also add Access Alarms to that privilege set.
TIP To create a privilege set that is similar to an existing set, select the existing set, then click Add. The
privileges that are initially selected are identical to those of the existing set.
38
To...
HVAC graphics category
and
HVAC technicians only
Lighting/Security Graphics category
and
Security personnel only
, then select System Options.
Results
The security personnel cannot see the HVAC
graphics because they do not have Access User
Category 1.
The HVAC technicians cannot see the
Lighting/Security graphics because they do not
have Access User Category 2.
i-Vu CCN Pro 4.2