Working With Equipment - Carrier i-Vu CCN Pro 4.2 Installation Manual

Working with equipment

You can view and adjust equipment operation from the following pages:
Graphics pages (page 28)
You can view and adjust your essential building
controls on most Graphics pages.
Equipment drawings
mechanical equipment.
Adjust
setpoints
To upload a graphic from ViewBuilder, right-click on
the device in the navigation tree and select
.
Configure
Property pages (page 31)
You can monitor and control point sources.
Select the equipment in the navigation tree.
1
Click Properties page > Equipment tab.
2
Expand the plus sign next to the desired table.
3
CCN equipment tables (page 43)
In the navigation tree, select the equipment.
1
Click
2
Select the table you want to view.
3
These tables are not in the system database, but are
dynamically generated from the tables in the device.
i-Vu CCN Pro 4.2
show the current status of
(page 33) on a Graphics page.
next to the equipment to expand it.
Operating i-Vu CCN Pro
27