I-Vu Ccn Pro Ccn Schedules - Carrier i-Vu CCN Pro 4.2 Installation Manual

Monitor and control equipment
To display driver
Right-click an equipment in the navigation tree.
1
Select Driver Properties from the drop-down menu.
2
To change driver
Right-click an equipment in the navigation tree.
1
Select Driver Properties from the drop-down menu.
2
Right-click Driver in navigation tree and select Configure.
3
Browse to desired driver and click Add.
4
To set driver properties
Right-click an equipment in the navigation tree.
1
Select Driver Properties from the drop-down menu.
2
Expand Protocols and select desired protocol.
3
Select Port, Timing, and Protocol Configuration.
4
NOTE Refer to the Integration Guide documentation for your specific protocol for detailed instructions.

i-Vu CCN Pro CCN schedules

There are two types of CCN schedules:
•
1 – 64 are local schedules that reside within the equipment
•
65 – 99 are network or global schedules, which are sent over a CCN network and received by controllers
that contain network schedules
i-Vu CCN Pro supports both local and global schedules.
Most CCN equipment is shipped with the default schedule of 64. See exceptions below.
Equipment
Comfort Controller/UC/Expansion Controllers
Any controllers using a custom equipment file (*.equip)
created with ApplicationBuilder
Gen III VVT, 48/50EJ (Conquest), FSM, CSM
All PICs
CAUTION! Confirm the actual schedule numbers that are in use in the controller, as they may have been
changed from their programmed default settings.
In order to utilize i-Vu CCN Pro schedules, the i-Vu CCN Pro schedule number must match the CCN schedule
number at the controller. This can be set in i-Vu CCN Pro by selecting the equipment in the navigation tree
46
i-Vu CCN Pro's default
schedule number
0
0
1
64
i-Vu CCN Pro 4.2