Graphing Data For Multiple Points; To Create A Comparison Trend Graph - Carrier i-Vu CCN Pro 4.2 Installation Manual

Monitor and control equipment
Field
BACnet Configuration
NOTES
•
Run a Trend Usage (page 83) report to view trend data.
•
You can use Global Copy (page 32) to copy trend properties to other pieces of equipment that use the
same control program.

Graphing data for multiple points

You can graph multiple trend points simultaneously to help monitor and troubleshoot your system.
A comparison trend graph can display up to four graphs on the page. Each graph can display up to 4 similar
points - 4 binary points or 4 analog points.
NOTE Before you create a comparison trend graph, verify trending for the individual points you want to
include in the graph. See To collect trend data for a point.

To create a comparison trend graph

You can select up to 16 trends to view, then save them for graphing again later.
In the navigation tree, select the area or equipment where you want to view the graph.
1
Click the Trends button drop-down arrow, then select New Graph.
2
Select up to 16 trends from the selection tree. Use Ctrl+click, Shift+click, or both to select multiple
3
items.
76
Notes
The is a unique alphanumeric string that defines the
Object Name
BACnet object. Although the
not recommended. The
Notification Class
alarms generated by Carrier controllers.
field can be edited, it is
Object Name
is set to 1 to receive
i-Vu CCN Pro 4.2