Initialization Of Set Value (Clear); Overview - Canon imageRUNNER iR2270 Service Manual

Chapter 4

4.7 Initialization of Set Value (CLEAR)

4.7.1 Overview

You can select and initialize data by making the following selections; as a result, settings
and various parameter values will be reset to the factory settings.
Item
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
ALL
COUNTER
*1: If the model is capable of storing addresses other than fax addresses, the telephone
number data will not be deleted upon execution of 'TEL' and 'ALL'. To remove the
telephone number
COPIER>FUNCTION>CLEAR>ADRS-BK.
*2: When 'ALL' is executed, the values suited to the destination of the machine will be
stored under 'TYPE'; in the case of Japan, 'standard'.
4-34
T-4-24
Data to be initialized
telephone number registration data (*1)
user data and data registered under SSSW #1 through #3.
of user data, the memory management data will not be deleted.
image data collected in memory will not be deleted.
user data and data in SSSW #1 through #3, #7.
data under SSSW#4.
system dump list data.
communication control report data.
all settings/registered data (*1) except data under #5 TYPE (*2).
number of prints, number of sheets read.
data, use the host machine's
0008-0468
service mode: