Sample Set - Canon IR6000 Quick Manual

INTERRUPT
Use the interrupt mode to interrupt the current job to make priority copies
1. Press Interrupt button.
2. Place originals, reset the copier, set the desired copy settings and press the Start button.
3. Once the originals are scanned, remove them from the machine, and wait for the machine to bleep
indicating that the interrupt copy is made. The machine will automatically resume copying.

SAMPLE SET

When making multiple copies, the machine copies only one set to be checked before completing the copying
job. Sample set button will only appear when 2 or more copies are requested, and the document is placed in
the document feeder.
1. Place originals in document feeder.
2. Enter the desired number of copies.
3. Press the Sample Set button.
4. Set copy settings i.e. 2 sided copying.
5. Press the Start button. The machine will stop after printing the first set.
6. If the settings are correct, press the Start Print button, to complete the copy job.
7. If the settings are incorrect, press the Change Settings button and change copier settings to copy the job
with new settings.
RESERVATION JOB
Up to 5 reservation jobs can be scanned into memory while the machine is copying the first job. The next
copy job will automatically begin when the current job is completed.
1. Set the first copy job as normal, and press the Start button.
2. Once all the originals are scanned into memory, press the Done button. The machine is now available
for the next job to be scanned.
3. Reset the machine (yellow button), and set the next copy job.
4. Repeat steps 2-3 the set the next job.
2