Detailed Discussions Of Bit 0; Detailed Discussions Of Bit 1; Detailed Discussions Of Bit 2; Detailed Discussions Of Bit 3 - Canon imageRUNNER iR2270 Service Manual

4.2.11.2 Detailed Discussions of Bit 0

Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used.

4.2.11.3 Detailed Discussions of Bit 1

Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.

4.2.11.4 Detailed Discussions of Bit 2

If ANSam signal is not received during transmission, select whether to use the V.8 protocol
when the other fax machine declares the V.8 protocol in DIS signal. If NO is selected, the
CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies
the V.8 protocol is received.

4.2.11.5 Detailed Discussions of Bit 3

Select whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the
V.8 protocol cannot be used because it is not declared in DIS signal.

4.2.11.6 Detailed Discussions of Bit 4

Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the
receiver does not fall back.

4.2.11.7 Detailed Discussions of Bit 5

Select whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected,
teh transmitter does not fall back.
Chapter 4
0008-0410
0008-0411
0008-0412
0008-0413
0008-0415
0008-0416
4-21