Canon imageRUNNER iR2270 Service Manual page 179

Chapter 5
No. T/R
##261 [T/R]
##280 [T]
##281 [T]
##282 [T]
##283 [T]
##284 [T]
##285 [T]
##286 [T]
##287 [T]
##288 [T]
##289 [T]
##290 [T]
##670 [T]
##671 [R]
##672 [T]
##673 [R]
##674 [T]
5-6
Description
system error has occurred.
at time of transmission, the procedural signal has been transmitted more than
specified.
at time of transmission, the procedural signal has been transmitted more than
specified.
at time of transmission, the procedural signal has been transmitted more than
specified.
at time of transmission, the procedural signal has been transmitted more than
specified.
at time of transmission, DCN is received after transmission of TCF.
at time of transmission, DCN is received after transmission of EOP.
at time of transmission, DCN is received after transmission of EOM.
at time of transmission DCN is received after transmission of MPS.
after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected
to be detected, and the CI signal is expected to be transmitted in response;
however, the procedure fails to advance, and the line is released because of T1
time-out.
at time of V.8 arrival, procedure fails to move to phase 2 after detection
signal from caller, causing T1 time-out and releasing line
at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and
thereafter stops, causing the machine to release the line and suffer T1 timeout.
at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and
thereafter stops, causing the machine to release the line and suffer T1 timeout.
at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the
control channel and thereafter stops, causing the machine to release the line and
suffer T1 timeout.
of CM