Service Error Code - Canon imageRUNNER iR2270 Service Manual

5.3 Service Error Code

5.3.1 Service Error Code
No. T/R
##100 [T]
##101 [T/R]
##102 [T]
##103 [R]
##104 [T]
##106 [R]
##107 [R]
##109 [T]
##111 [T/R]
##114 [R]
##200 [R]
##201 [T/R]
##204 [T]
##220 [T/R]
##223 [T/R]
##224 [T/R]
##226 [T/R]
##229 [R]
##232 [T]
##237 [R]
##238 [R]
T-5-5
Description
at time of transmission, the procedural signal has been transmitted more than
specified.
the modem speed does not match that of the other party.
at time of transmission, fall-back cannot be used.
at time of reception, EOL cannot be detected for 5 sec (15 sec if CBT).
at time of transmission, RTN or PIN is received.
at time of reception, the procedural signal is received for 6 sec while in wait for
the signal.
at time of reception, the transmitting party cannot use fall-back.
at time of transmission, a signal other than DIS, DTC, FTT, CFR, or CRP is
received, and the procedural signal has been sent more than specified.
memory error has occurred.
at time of reception, RTN is transmitted.
at time of reception, no image carrier is detected for 5 sec.
DCN is received outside the normal parity procedure.
DTC without transmission data is received.
system error (main program out of control) has occurred.
while a communication is under way, the line is cut.
in G3 communication, an error has occurred in the procedural signal.
the stack printer has fallen outside the RAM area.
the recording unit has remained locked for 1 min.
encoding error has occurred.
decoding error has occurred.
the print control unit is out of order.
Chapter 5
0007-6271
5-5