01
Missing areas of printing image when
receiving image with longer length than
standard
04
Leading edge blank area
05
Trailing edge blank area
4.6.2.2 <001: printing upon reception of extra-length image>
Use it to set the range of the image to be removed from when printing an extra-length
received image.
Lower the parameter to decrease the range if the trailing edge of the received image must
be retained (as when it is longer than the effective recording length).
4.6.2.3 <004: leading edge margin>
Use it to set the leading-edge margin for the effective recording length.
4.6.2.4 <005: trailing edge margin>
Use it to set the trailing-edge margin for the effective recording length.
0 to 9999
12
0 to 9999
3
0 to 9999
3
Chapter 4
1mm
1mm
1mm
0008-0463
0008-0465
0008-0467
4-33