Power Source & Network
Power Source
The C1000 controller is powered by the HVAC equipment's 24 VAC power supply by connecting the
common (''C'' wire) to the "COM" terminal block and the live (''R'' wire) to the "24 VAC" terminal block
(see Figure 14). The common for all inputs and outputs is the same as the power source's common. All
output power sources also originate from the controller's power source.
Network Communication
The ProLon C1000 Rooftop controller is primarily designed to work with ProLon zone controllers. When
they are networked the Rooftop and zone controllers all communicate in real-time. The network connec-
tions are made using the network terminal blocks located on the C1000 controller (see Figure 15).
REV. 6.1.6 / PL-HRDW-RTU-C1000-C/F-EN
24VAC
COM
24VAC
Figure 14 - Connecting the 24VAC Power Source
A
NET
B
Figure 15 - Connecting to the Network
( R )
To HVAC Equipment Terminal (Class 2)
( C )
( A )
Towards Network
( B )
15