Installation Preparation; Installation Warnings - Cisco PC4000 Installation Manual

Installation Preparation

•
•
•
•
•
•
•
•

Installation Warnings

Be sure to read the Regulatory and Compliance Safety Information document before installing the Secure
Endpoint PC4000 appliance.
Take note of the following warnings:
Warning
Warning
Installation Warnings, on page 21
Safety Recommendations, on page 23
Maintain Safety with Electricity, on page 24
Prevent ESD Damage, on page 25
Site Environment, on page 25
Site Considerations, on page 25
Power Supply Considerations, on page 25
Rack Configuration Considerations, on page 26
IMPORTANT SAFETY INSTRUCTIONS
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Read the installation instructions before using, installing, or
connecting the system to the power source. Use the statement number at the beginning of each warning
statement to locate its translation in the translated safety warnings for this device.
SAVE THESE INSTRUCTIONS
Statement 1005-Circuit Breaker
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: USA: 120 V, 15 A (EU: 250 V, 16 A)
C H A P T E R
Cisco Secure Endpoint PC4000 Hardware Installation Guide
2
21