Cisco IE-4000 Software Configuration Manual page 540

Configuring SNMP
How to Configure SNMP
Command
1. configure terminal
2. snmp-server engineID {local engineid-string
| remote ip-address [udp-port port-number]
engineid-string}
Purpose
Enters global configuration mode.
Configures a name for either the local or remote copy of SNMP.

The engineid-string is a 24-character ID string with the name
of the copy of SNMP. You need not specify the entire
24-character engine ID if it has trailing zeros. Specify only the
portion of the engine ID up to the point where only zeros
remain in the value. For example, to configure an engine ID of
123400000000000000000000, you can enter this:
snmp-server engineID local 1234

If you select remote, specify the ip-address of the device that
contains the remote copy of SNMP and the optional User
Datagram Protocol (UDP) port on the remote device. The
default is 162.
536