Cisco IE-4000 Software Configuration Manual page 145

Configuring SDM Templates
Configuration Examples for Configuring SDM Templates
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
Configuring Lanbase Templates: Example
This is an example of output from the show sdm prefer command on a Lanbase image:
Switch# show sdm prefer
The current template is "IPv4 default" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses:
number of IPv4 IGMP groups + multicast routes:
number of IPv4 unicast routes:
number of directly-connected IPv4 hosts:
number of indirect IPv4 routes:
number of IPv6 multicast groups:
number of IPv6 unicast routes:
number of directly-connected IPv6 addresses:
number of indirect IPv6 unicast routes:
number of IPv4 policy based routing aces:
number of IPv4/MAC qos aces:
number of IPv4/MAC security aces:
number of IPv6 policy based routing aces:
number of IPv6 qos aces:
number of IPv6 security aces:
0.5K
1K
0
0
0
16K
1K
5.25K
4K
1.25K
1K
5.25K
4K
1.25K
0.25K
1K
1K
0.25K
0.25K
0.25K
141