Configuring HSRP
Figure 47-95
Active router for group 1
Standby router for group 2
Configuring HSRP
These sections contain this configuration information:
•
•
•
•
•
•
•
•
•
Default HSRP Configuration
Table 47-62
Table 47-62
Feature
HSRP version
HSRP groups
Cisco Industrial Ethernet 4000 Series Switch Software Configuration Guide
-770
MHSRP Load Sharing
Router A
10.0.0.1
Client 1
Client 2
Default HSRP Configuration, page -770
HSRP Configuration Guidelines, page -771
Enabling HSRP, page -772
Configuring HSRP Priority, page -773
Configuring MHSRP, page -775
Configuring HSRP Authentication and Timers, page -776
Enabling HSRP Support for ICMP Redirect Messages, page -777
Configuring HSRP Groups and Clustering, page -777
Troubleshooting HSRP, page -777
shows the default HSRP configuration.
Default HSRP Configuration
Active router for group 2
Standby router for group 1
Router B
10.0.0.2
Client 3
Default Setting
Version 1
None configured
Chapter
Configuring HSRP and VRRP
Client 4