Mitsubishi Electric MELSERVO MRJ2S-B Instruction Manual page 38

Introduction
Fig. 1-24: Servo amplifier MR-J2S-350B4 to MR-J2S-700B4
No.
Tab. 1-8: Operating elements and their meaning
b
CAUTION:
Any mixing up of the connectors CN1A, CN1B, CN2 and CN3 can lead to a shortcircuit
and damage to the inputs and outputs.
1 - 20
MR-J2S-350B4 and MR-J2S-500B4
Name
Bus cable connector (CN1A)
Bus cable connector (CN1B)
Communication connector (CN3)
Name plate
Encoder connector (CN2)
Charge lamp
Control circuit terminal block (TE2) Used to connect the control circuit power
Main circuit terminal block (TE1)
Protective earth terminal (PE)
Fan
Description
Used to connect the servo system controller
or preceding axis servo amplifier.
Used to connect the subsequent axis servo
amplifier or termination connector
(MR-A-TM)
Used to connect a personal computer or
output analog monitor data.
—
Used for connection of the servo motor
encoder.
Lit to indicate that the main circuit is
charged. While this lamp is lit, do not
reconnect the cables
supply.
Used to connect the input power supply,
regenerative brake option and servo motor.
Module grounding
—
Operating elements
MR-J2S-700B4
S000916C
Reference
Section 3.1.3
Section 3.1.3
Section 3.1.3
Section 1.3.3
Section 3.1.3
—
Section 3.1.2
Section 3.1.2
Section 3.4
—