Led Status Displays; Supply Modules; Axis Modules - Lenze E70AC Series Hardware Manual

9.2

LED status displays

9.2.1

Supply modules

LED display of power supply module − V100
Colour Name
blue RDY
red ERR
9.2.2

Axis modules

LED display of axis module − V101
Colour Name
blue RDY
red ERR
LED display of axis module − X4/X5 EtherCAT IN/OUT
Name
RUN
L/A

EDS700ACBA EN 5.1
Status Description
24−V supply voltage off or £ 18 V
off
is ON 24−V supply voltage ok, module ready for operation
off Power supply module ready for operation
is ON Error/fault
Status Description
24−V supply voltage off or £ 18 V
off
is ON 24−V supply voltage ok, module ready for operation
blinking Axis module inhibited
fast blinking Optical device identification (simultaneously with red/ERR)
off Axis module ready for operation − no error − axis A (and B)
is ON Error/fault − device
Error/fault − axis A (or B)
fast blinking Optical device identification (simultaneously with blue/RDY)
Status Description
is ON "Operational" status is active.
flickering "Bootstrap" status is active.
blinking "Pre−operational" status is active.
blinking once
"Safe−operational" status is active.
(single flash)
off Fieldbus communication is not active or is in the "Init" state.
is ON Physical EtherCAT connection is available.
flickering Data are exchanged via EtherCAT.
off Physical EtherCAT−CAT connection is not available
− This LED is used for internal diagnostic purposes.
l
Diagnostics
LED status displays
Supply modules
9
i700AX045 b
127