Drilling The Holes Into The Mounting Plate - Lenze E70AC Series Hardware Manual

5.2

Drilling the holes into the mounting plate

Mounting grid
We recommend to provide the mounting plate with a grid pattern of M5 threaded holes
for attaching the devices. This preparation enables easy attachment of the devices and the
device sizes 1 (b = 50 mm) and 2 (b = 100 mm) can thus be mounted directly adjacent to
each other.
)
Note!
ƒ
ƒ
EDS700ACBA EN 5.1
Drilling the holes into the mounting plate
M5 screw and washer assemblies or hexagon socket screws with washers
are permitted.
Tightening torque: 3.4 Nm / 30 lb−in.
l
Mechanical installation 5
67