Identification - Lenze E70AC Series Hardware Manual

3 Product description

Identification

3.3 Identification
The type data used in this manual refer to the nameplate which is placed at the front of the
controller (Fig. 3−1).
Fig. 3−1
2
Icon
{
}
'
|
24
Contents and position of the nameplate
Notes and warning symbols 2
A
B Product designation at the front
C Serial number
D Product designation at the side
E Hardware and/or software version
F Rated input power
G Conformity and approval identification
H Rated output power (power supply module or motor (A))
I Rated output power (for 2−axis modules: motor B)
Description
Long discharge time: All power terminals remain live for a few minutes after mains
disconnection! The duration is given under the warning symbol on the device.
High leakage current: Carry out fixed installation and PE connection according to EN 61800−5−1!
Electrostatic sensitive devices: Before working on the device, the personnel must be free of
electrostatic charge!
Hot surface: Risk of burns! Hot surfaces should not be touched without wearing protective
gloves.
l
A
B
1234567890
Ser.No.
C
L
i700
D
Type
E HW
SW
J
Input
F
G
Q
Output A
H
Output B
I
i700A001
EDS700ACBA EN 5.1