Amada HFA-250 Operator's Manual page 87

8 Pull down the left-
hand and right-hand
saw blade insert
clamp levers to open
the saw blade inserts.
9 Turn the saw blade
tension lever to the
" " position.
The driven wheel
moves to the right.
10 Loosen the wire brush
lock lever, and lower
the wire brush and
wire brush cover.
11 Install the saw blade
on the drive and
driven wheels with the
cutting edge facing
down.
SAW BLADE
INSERT CLAMP LEVERS
SAW BLADE
TENSION LEVER
WIRE BRUSH
COVER
WIRE BRUSH
LOCK LEVER
IV-9