Rotating Beacon Lights (Factory Option; Wheel Cover Open Limit Switch (Factory Option - Amada HFA-250 Operator's Manual

ROTATING BEACON LIGHTS
(FACTORY OPTION)
WHEEL COVER OPEN LIMIT SWITCH
(FACTORY OPTION)
A-4
The yellow and red beacon lights flash to indicate that the machine has
stopped at the end of automatic operation and at the occurrence of an
alarm, respectively. The green beacon light illuminates to indicate that
cutting is under way.
When working apart from the machine, the operator can know from the
beacon lights to see if the machine is operating or not.
A safety device to stop the saw blade running when the wheel cover is
opened.
When the wheel cover is opened during the operation of the machine, its
open limit switch is activated to stop the saw blade running and display
the alarm code "E-002". The same alarm occurs also when the BLADE
DRIVE button is pressed with the wheel cover opened.