Adjusting Position Of Movable Saw Blade Guide - Amada HFA-250 Operator's Manual

ADJUSTING POSITION OF MOVABLE SAW
BLADE GUIDE
IV-12
Adjust the distance between the saw blade guides to suit the width of
the work to be cut as described below. If this distance is too wide, the
saw blade may run out or break.
1 Pull down the left-hand saw blade insert clamp lever to open the
left-hand saw blade insert.
2 Loosen the lock
handle for the
movable saw blade
guide, and slide the
movable saw blade
guide by hand to suit
the width of the work
to be cut.
Bring the movable
saw blade guide as
close as possible to
the work. Refer to
the work width scale
attached to the guide
bar.
3 Securely tighten the lock handle so that the movable saw blade
guide has no play.
4 Pull up the left-hand saw blade insert clamp lever to close the left-
hand saw blade insert.
LOCK
WORK WIDTH
HANDLE
SCALE
SAW BLADE INSERT
CLAMP LEVERS
SAW BLADE
GUIDES