Every Year; Changing Speed Reducer Oil (For Second And Subsequent Times; Changing Speed Reducer Oil; (For Second And Subsequent Times - Amada HFA-250 Operator's Manual

Every year

CHANGING SPEED REDUCER OIL

(FOR SECOND AND SUBSEQUENT TIMES)

Change the speed reducer
oil as described below. At
one year after its complete
change, be sure to change
the entire speed reducer oil
despite its intermediate
addition.
Recommended oils: Amada Gear Oil EP320
Esso Teresso 320
Shell Tellus Oil C320
Mobil DTE Oil AA
(ISO VG320 equivalent)
Required amount of oil: 2 liters {0.53 US gal} for HFA-250 and
NOTE
Dispose of the used speed reducer oil as specified by the manufacturer and
by the applicable government regulations in your country.
1 Press and hold the BLADE DOWN button to move the sawhead
down to the lower limit.
2 Press the HYDRAULIC OFF button to stop the hydraulic pump
motor.
3 Turn the machine circuit breaker switch to OFF.
4 Turn off the shop circuit breaker switch.
5 Remove the filler plug of the speed reducer.
6 Remove the drain plug of the speed reducer to drain the speed
reducer oil.
7 After the speed reducer oil is completely drained, replace the drain
plug.
8 Pour a fresh speed reducer oil through the filler opening to the
middle of the sight gauge.
NOTICE
If the saw blade is started with an insufficient supply of speed reducer oil,
the speed reducer may be damaged.
9 Replace the filler plug.
52--,
4-,7+-4
HFA-250W
5.5 liters {1.45 US gal} for HFA-400 and
HFA-400W
51/06 /)7/-
VI-11