Advertisement
TREADMILL LUBRICATION
IMPORTANT NOTE:
You will need to lubricate your treadmill before the first use!
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the Running Belt (No. 7) & Running Board (No. 6) is essential as the friction
between the two affects the life span and operations of the treadmill. Inspect the Running Belt
(No. 7) regularly. If you find any wear on the Running Board (No. 6), please contact us at
support@sunnyhealthfitness.com
.
Lift one side of the Running Belt (No. 7) and touch the top surface of the Running Board (No.
6). If the surface is dry, lift one side of the Running Belt (No. 7) and at the same time apply
lubricant to the Running Board (No. 6). Make sure to walk on your treadmill at a slow speed
for the first 3-4 minutes of use after applying lubricant. This helps to distribute the lubricant
equally.
NOTE: Do not apply lubricant over the belt. Any excess lubricant should be wiped off.
Lubricant may be applied whenever friction occurs, but it is usually required every 50 hours of
use. Please remember that this is only a guideline based on average treadmill use, your
schedule may vary.
ADJUSTING THE TENSION
There are 16 resistance levels on this Tension Control Knob (No. 12). Number 1 is the
lowest resistance; number 16 is the highest resistance. To increase the tension, turn the knob
clockwise;To decrease the tension, turn the knob counter-clockwise.
9
Advertisement
