Table of Contents
Advertisement
General cleaning will help to prolong the life and improve performance on your treadmill.
Keep the unit clean and maintained by dusting the components on a regular basis, cleaning
the two exposed sides of the running belt to prevent dust from accumulating underneath
the belt. Keep your running shoes clean so that dirt from the shoes does not wear the
running belt. Clean the surface of the running belt using a clean damp cloth. Keep liquids
away from electrical parts and running belt.
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3.5-5MPH to check and see if the Running
Belt (No. 20) drifts from the center.
1. If the Running Belt (No. 20) drifts to
the right, turn the adjusting bolt on the
right side ¼ turn clockwise, then turn
the left adjustment bolt ¼ turn counter-
clockwise. If the belt does not move,
repeat this step until it centers. Refer
to image A.
2. If the Running Belt (No. 20) drifts to
the left, turn the adjusting bolt on the
left side ¼ of a turn clockwise, then
turn the right adjustment bolt ¼ turn
counter-clockwise. If the belt does not
move, repeat this step until it centers.
Refer to image B.
3. Over time, the Running Belt (No.
20) will loosen. To tighten the belt,
turn both the left & right
adjustment
bolts
clockwise. Check the tension of the
belt. Continue this process until belt is
at the correct tension. Make sure to
adjust both sides equally to ensure
even belt alignment. Refer to image
C.
MAINTENANCE GUIDE
side
one
full
turn
21
Advertisement
Table of Contents
