Using Diagnostics - SMC Networks ADSL Barricade SMC7204BRA User Manual

- TEAppl.gsz
- Filesys.bin
- TEPatch.bin
3. Click [Upload]. The following message box appears at the
bottom of the page:
4. When loading is complete, the following message appears
(the file name may differ):
Turn power to the unit off, wait a few seconds, and turn it on
again. The new software will now be running. If the system
fails to boot or is not working properly, contact your ISP for
troubleshooting assistance.

Using Diagnostics

The diagnostics feature executes a series of tests of your system
software and hardware connections. Use this feature when
working with your ISP to troubleshoot problems.
Follow these instructions to begin the diagnostics program:
1. Log into the Configuration Manager, click the [Admin] tab.
Then click [Diagnostics] in the task bar. Figure 60 shows the
[Diagnostics] page.
Loading New Software:
Please do not interrupt the upgrade process.
A status page will appear Automatically when
loading is completed (about 1 minute).
File:
TEDsl.gsz successfully saved to flash. Please reboot for
the new image to take effect.
Using Diagnostics
161