Viewing Your Eoa Setup - SMC Networks ADSL Barricade SMC7204BRA User Manual

Configuring EOA Interfaces

Viewing Your EOA Setup

To view your current EOA configuration, log into Configuration
Manager and click [WAN] in the task bar. Then click [EOA]. Figure
40 shows the [RFC1483/Ethernet over ATM (EOA) Config] page.
Figure 40. RFC1483/Ethernet over ATM (EOA) Config Page
The EOA table contains a row for each EOA interface currently
defined on the device. The table may contain no entries if your
ISP does not use the EOA protocol.
The following table describes the fields on this page:
Field
Interface
116
Description
This is the name the software uses to identify the EOA
interface.