Table of Contents
Advertisement
XRM945
Boom Angle Indicator
The boom angle indicator is located on the left side of
the boom and is visible from the operator's seat. Use
the boom angle indicator to determine the boom angle
when referring to load capacity charts. Refer to the
Load Capacity Charts section of this manual for more
information.
NOTE: The boom angle indicator is a plumb arrow with
angular graduations from -5 to +70°.
Figure 6-40. Boom Angle Indicator.
Boom Extend Letters
As the boom is extended, boom extend letters appear on
the left side of the boom visible to the operator. These
letters indicate boom extension as it corresponds to the
load capacity charts.
Figure 6-41. Boom Extend Letters.
For information call (800) 497-1704
Frame Level Indicator
The frame level indicator is mounted on the inside top
center of the operator's cab. The frame level indicator
allows the operator to view if the forklift has been
positioned in a level condition. Always frame sway the
forklift right or left until the indicator shows 0° (level).
Figure 6-42. Frame Level Indicator.
Optional Controls and Indicators
Two Wheel Rear (2WR)
Steering Switch (Optional)
Caution
DO NOT change steering modes until the forklift
comes to a complete stop. Align all four (4) tires
"straight-ahead", or perpendicular to the axle, before
changing steering mode.
Operator Cab
Page 41
Advertisement
Table of Contents
