Xtreme Manufacturing XRM945 Operation & Safety Manual page 60

Operation
2. Tilt the quick attach link forwards.
3. Extend the boom and/or drive the forklift forward
until pivot pins (A) are below and between the two (2)
attachment hooks (B).
Figure 7-26. Drive Vehicle Forward To Align Pivot Pins (A) With
Attachment Hooks (B).
4. Raise the boom until pivot pins (A) have seated fully in
attachment hooks (B).
Figure 7-27. Raise Boom To Seat Pivot Pins (A) In Attachment
Hooks (B).
Page 60
5. Tilt the attachment up slightly. The quick attach link
should be tight against the rear of the attachment.
Align the holes between the quick attach link
and attachment.
Figure 7-28. Tilt Attachment To Align Holes Between Quick Attach
Link and Attachment.
(A) Not Aligned. (B) Aligned.
6. Raise the quick attach lock lever.
Figure 7-29. Raise Quick Attach Lock Lever.
XRM945
Xtreme Manufacturing, LLC