XRM945
Warning
Hydraulic attachments have a
maximum hydraulic pressure
rating. Failure to make sure
the attachment is equal to or
slightly greater than 3,500 psi (241.4 bar), which is the
maximum pressure of the forklift auxiliary hydraulic
system at the quick attach couplers, could result in
injury or death.
When the auxiliary attachment control lever is moved
right or left it activates hydraulic pressure through the
quick attach couplers to move the carriage.
Figure 7-24. Quick Attach Couplers For Hydraulic Systems.
(A) Female Coupler. (B) Male Coupler.
For information call (800) 497-1704
Quick Attach System
This forklift includes a quick attach system that allows
for easy attachment changes. Perform attachment
connection and removal procedures on level ground.
Attachment Connection
Warning
Improper connection of an auxiliary
attachment can result in injury or death.
Attachments not locked into place can
break free and fall on the operator or
other personnel near the forklift.
• Make sure attachment locking devices are always in
place.
• DO NOT operate the forklift until you have positive
indication that the quick attach pin and lock lever
are fully engaged.
1. Position the forklift directly behind the attachment.
NOTE: Allow enough distance to extend the boom
approximately 18 to 20 inches (0.46 to 0.5 meters).
Figure 7-25. Position Quick Attach Link In Line With Attachment.
Operation
Page 59